Filter By:
- Accessories/Parts (6)
- Hitch-Mount (11)
- Roof-Mount (1)
- Trunk-Mount (1)
Car Racks
$300.00
Whether you're going on a cross country family road trip or heading out for a bike-friendly weekend, the BackRoad is your take-it-easy answer. With increased bike spacing, the BackRoad makes it easy to pack more bikes with a lot less hassle. Cradles and pads provide a snug and protected fit, while fully removable ZipStrips make loading a breeze. An SKS bike locking system is included to give you some peace of mind on your travels.
Product Details
- 7" spacing between bikes for easier loading
- Soft cradle pads for added bike protection
- Side to side cradle rotation for a better bike fit
- Anti-sway cradles eliminate bike-to-bike contact
- Mast tilts down for easy hatch access
- Integrated SKS locking cable locks bikes to rack
- ZipStrips secure bikes to the rack and are fully removable
- Arms fold down when not in use
- 37.5lb weight maximum per bike
- Fits 1.25" and 2" hitch receiver
- Integrated Yakima bottle opener
- Carries up to 2 bikes. Also available in a 4 bike capacity
- Available TubeTop (sold separately) is required for non-conventional, step-through, BMX, and kid's bikes as well as some full suspension bikes.
- Weight: 31.21 lbs.
- Dimensions: L 44.00 in x W 12.00 in x H 16.00 in
- Limited Lifetime Warranty
$350.00
Hitch rack swing adapter.
Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido.
Product Details:
- Hitch extension converts most 2" hitch products to a swing-away rack
- Provides easy tailgate access - even with a rack fully loaded with bikes
- Easily swings open 90 degrees and locks in place with the simple to use release lever
- Safety latch secures the rack closed while you're on the road
- Secures to any 2" hitch receiver using a threaded pin
- Included SKS (Same Key System) lock keeps the rack secure
- 250 lb maximum load capacity (rack plus gear)
Product Specs:
- Weight: 35.46 lbs
- Dimensions: L 20.00" x W 30.00" x H 8.00"
Installation Details:
- Some Assembly Required
- 10 Minute Install
- 2" Hitch Receiver Required
Compatible with the following:
- Dr.Tray- 2" only (without the EZ+1 attached)
- SingleSpeed
- HangOver 4 - 4 Bike only
- TwoTimer
- HoldUp EVO
- HoldUp EVO +2
- HoldUp
- HoldUp +2
- FourTimer
- LongHaul (Vans and Passenger Vehicles Only)
- RoadTrip (Vans and Passenger Vehicles Only)
$260.00
A fresher take on the classic strap rack, the Yakima FullBack 2 securely holds your bike, is simple to use, stores easily, installs easily, and is easy on the wallet. The construction is rugged, the modern design is as cool as your ride, a locking package deters bike theft, and there’s a built-in bottle opener. Cheers. - New SuperCush ZipStrip cradles secure the bikes and make loading and unloading a breeze - ZipStrips secure bikes to the rack and are fully removable - Modern design delivers an improved fit and looks awesome - Bomber external frame holds tough, cushy padding protects your paint - Full SKS locking package secures rack to vehicle, bikes to rack to help prevent theft - Simple installation with an interlocking HUB that aligns key adjustment points - Four-strap attachment is intuitive and easy - Compact for easy storage - Premium high-gloss finish - Yakima signature bottle opener lets you enjoy a post-ride cold one - Easy number dial makes installation simple - Number of Bikes 2 TECHNICAL SPECS - Weight: 22.00 lbs - Dimensions: L 30.00” x W 25.00” x H 22.00”
$1,000.00
All your bikes, all at once. The HangTight is designed for versatility, built to handle adventures of all sorts, and won’t blink at anything from kids to fat bikes to road to mountain bikes and everything in between. With fully padded cradles that support each bike by the handlebars, it serves up a shuttle-ready blend of stability and ease of use. The HangTight will get your bikes to the ride and back home safely no matter if your crew is a mix of all-mountain shredders or simply a family headed out for two-wheeled exploration.
$270.00
Secure, sleek, and simple to use, the HighRoad is Yakima's newest premium upright bike mount. The adjustment-free hoop, with its TorqueRight tightening knob, loads a variety of bikes quickly and easily. The HighRoad secures the bike by the wheels for ultimate bike protection and the low-profile design minimizes hatch interference. Universal mounting hardware fits most roof racks.
- New wheel hoop fits 26" to 29" wheels and tires from 23mm to 4.0" with no adjustment needed
- New integrated TorqueRight knob quickly and easily secures the bike with precision
- Requires no wheel removal and makes no contact with the bike frame—a great option for carbon fiber bikes and custom paint jobs
- Sleek, low-profile tray minimizes hatch interference
- Tool-free, universal mounting hardware fits most roof racks
- Add your own bike lock to the integrated lock loop for additional bike security when your vehicle is parked
- Easily convert to integrate with T-Slot crossbars with the addition of a SmarT-Slot Kit
- Add SKS Locks (2) to the included TailWhip cable to secure your bike and mount to your roof rack (sold separately)
- Accommodates bike wheelbases up to 48"
Product Specs:
- Weight: 18.00 lbs.
- Dimensions: L 56.00 in x W 9.50 in x H 4.50 in
- Minimum Crossbar Spread 18.00in
- Maximum Crossbar Spread 36.00in
- Limited Lifetime Warranty
$500.00
Now you can haul 2 bikes of any size, from stout BMX bikes to long cruisers and heavy DH bikes with no need for adapters thanks to Yakima's HoldUp Hitch Rack. This sturdy rack sports heavy cast wheel trays and their adjustable StrongArm retainers that hold the bikes by the wheels for superior stability and super-quick loading. Side-to-side adjustability ensures a perfect fit and minimizes bike-to-bike interference. A user-friendly trigger folds the tray down for easy access and the entire mast folds up when not in use. Plus, the HoldUp also includes Yakima's LockDown cable system, which secures your bicycles and rack to your vehicle. There's even an integrated bottle opener.
$100.00
The Access Bike Ramp makes it easy to load your bike onto your Kuat NV 2.0 hitch rack.
$300.00
Kuat's Beta is a lean, mean rack that carries two bikes (up to 80 lbs. total capacity) and weighs in at just under 14 lbs.
- Carries 2 bikes (up to 40 lbs. each)
- Total carrying capacity of up to 80 lbs.
- Folds up quickly for storage
- Tilts down for easy vehicle access
- Enhance the Beta with hitch lock system (sold separately)
- Hand-tight cam system - no need for additional tools!
- Anti-sway carriages for a smooth ride
- Aluminum construction is lightweight and extremely durable
- Gun Metal Gray powder coat finish
- 2-inch weighs only 12 lbs. (lightest weight on the market)
- 1.25-inch weighs only 14 lbs. (additional 2lbs due to steel lower end)
- Available for 2-inch OR 1.25-inch receivers. The 1.25-inch Beta can fit either hitch size with the 1.25-inch to 2-inch adapter.
$600.00
When your solo ride turns into a weekend expedition with friends, the NV 2.0 Add-On lets you increase the NV 2.0 carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front.
- Adjustable front tire cradle system
- Fully integrated cable locks
- Trail Doc compatible
- Front tire ratchet design with an intuitive release
- Rear tire strap features a co-molded strap to protect wheels
- Premium gloss metallic powder with water transferred logos
- Compatible with 2” NV 2.0
- Increases 2” NV 2.0 carrying capacity to 4 bicycles weighing up to 40 - pounds each
- Holds wheelbases up to 48” and tires as large as 4.8”
- Quick change from 2 to 4 bikes
$360.00
Expand your vehicle’s carry capacity (and your circle of friends) up to four bikes with the NV 2.0 Add-Ons. It's conceived for road trips, family group rides and expeditions in the backcountry—we took the best platform rack on the market and increased it.
Integrated Cable Locks
- Seamlessly integrated locks—long enough to fit any frame—make sure your bike stays off Craigslist while you enjoy that post-ride beer stop. And when you’re ready to roll again, they stow right back into the rack.
Adjustable Tire Cradles
- Bikes not wanting to share space nicely? Easily dial in the fit with adjustable tire scoops. You get three positions to choose from, so handlebar and seat post clearance is never an issue.
- Intuitive Front Tire Ratchet
- Trail-Doc Compatible
- Premium Protective Gloss or Matte Powdercoat
$800.00
Kuat's NV 2.0 Base is loaded with features that make it one of the most equipped platform racks on the planet. This darkened brute features Kuat's foot lever pivot release, adjustable cradles for increased bike fit, integrated cable locks, a hand-tight cam system, and a ballistic black powder coat that will stand up to years of abuse.
- Adjustable front tire cradle system
- Re-designed pivot with optional foot assist
- Fully integrated cable locks and hitch lock included
- Front tire ratchet with an intuitive release
- Rear tire strap features a co-molded strap to protect wheels
- No-tool install with hand tight hitch cam system
- Premium matte powder coat
- 2 Bike capacity up to 60 lbs. each
- Holds wheelbases up to 48-inch and tires as large as 4.8-inch
- Available in both 2-inch & 1.25-inch hitch sizes
- Dedicated 2-inch model is able to carry up to 4 bikes with optional NV Add-On 2.0 Base
$1,100.00
The Piston® Pro features some of the same great features as The Piston® Pro X minus a few bells and whistles. Features like all metal construction, OneTap™ hydro-pneumatic tire arms that make no contact on the bike frame, and tool-free wheel chock slides.
But don't worry, this thing still sings.
- All metal construction
- OneTap™ hydro-pneumatic tire arms
- No frame contact
- Patented FastFit™ tool-free wheel chock system
- Patented PedalPivot™
- Patented Flatlock™ hitch cam
- No Worries Limited Warranty
- 2 – Bike capacity (Add-ons Available)
- 67 lbs. per tray on 2” 2-bike, 60lbs. for 1.25” version
- 42 lbs. per tray on chassis mounted RV hitch (see limited warranty for details)
- 53” Max wheelbase
- 5” Max tire width
$500.00 - $900.00
When you're ready to double up the excitement, effortlessly add up to two extra riders using our 1-Bike or 2-Bike Add-Ons. The user-friendly modular design makes attaching the additional trays a no-brainer. THE PISTON® Pro Add-Ons, taking you AND your crew to the adventure.
- All metal construction
- OneTap™ hydro-pneumatic tire arms
- No frame contact
- Patented FastFit™ tool-free wheel chock system
$690.00
The all-new aluminum Sherpa 2.0 resets the standard for user-friendly adventure. Folding tire cradles create an abundance of clearance while Kuat's foot-actuated pivot lever lets you bask in the glory of carrying a bike or eating a breakfast burrito while unfolding your rack at the same time. With features designed around your lifestyle, this lightweight rack is as easy to take off as it is to leave on.
- Re-designed pivot with optional foot assist
- Semi-integrated bike lock
- Front tire ratchet design with an intuitive release
- Rear tire cradle features a co-molded strap to protect wheels
- Folding front cradle adds space between rack and vehicle
- No-tool install with hand tight hitch cam system
- Gloss metallic powder available in 3 colors
- Low profile arced design delivers an amazing look
- 2 Bike capacity up to 40 lbs. each
- Holds wheelbases up to 47-inch and tires as large as 3-inch
- Increased spacing between bikes to 14-inch
- Lightweight platform rack design as low as 32lbs (assembled)
- Available in both 2-inch & 1.25-inch hitch sizes
$389.00 - $590.00
The Transfer v2 is more solid than ever. From the steel construction of the original to a new Flatlock hitch cam for enhanced stability in tow. Plus, a semi-integrated cable lock for an upgrade in security. The best part? The new Transfer v2 has the modular configurations available so you get a multi-rider rack at an everyone-friendly price.
- Flatlock cam for 2", ball cam for 1.25"
- Includes semi-integrated bicycle cable lock
- Tamper-resistant hitch security
- More robust hitch design for enhanced stability in tow
- Holds up to a 50" wheelbase bike (previously 47")
- Holds wheels 18"-29" (previously 20"-29")
- Holds tires up to 5" with accessory strap (previously 4.5") + better hook clearance for loading fat bikes
- Automotive-grade 750 hour salt spray hardware
- Dedicated 2" hitch version in the 2 bike configuration can be directly mounted on campers, recreational vehicles, or trailers with CHASSIS MOUNTED RECEIVERS ONLY.
$40.00
So the international bike builder didn’t consider your bike rack design when creating his new full suspension frame? No worries. Kuat’s Ubar can adapt almost any frame to fit our Alpha or Beta rack.
Features
- Adapts oddly shaped frames for use with hanging style racks
- Spring loaded for a solid fit
- Coated hooks (prevent wear on your bike)
- Installs in seconds
- Fits most bikes
Page 1 of 1