Parts

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs

Cleats with a more forgiving 10-deg release. - Optimized for novice riders or those new to clip-in pedals - 10-deg release angle makes it easier to unclip - 2-hole bolt pattern for mountain bike shoes - Plastic spacing shims included - Compatible with all Crankbrothers clip-in pedals

Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees

Get a little more ankle room with this long-spindle version of Crank Brothers' Mallet E pedal. - Concave platform for secure foothold - 6 adjustable pins per side for grip - Integrated traction pad technology to optimize the shoe/pedal interface  - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for increased shoe clearance and control - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system

The ultimate pedal for enduro riding and racing, with a longer spindle. - Concave platform for secure foothold - 6 adjustable pins per side for grip - Integrated traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for increased shoe clearance and control - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system - Adjustable Pins: 6 per side - Body Material: 6061-T6 aluminum - Cleats: Premium brass cleats with shims included - Endcap: Hex alloy - Inner Bearing Type: Igus LL-glide bearing - Max Rider Weight: No restriction - Outer Bearing Type: Enduro cartridge bearing - Q-factor: 57mm - Release Angle: 15° / 20° - Spindle Material: Forged scm 435 chromoly steel - Spring Material: 300 series stainless steel - Warranty: 5 years - Weight: 424g per pair - Wing Material: 17-4PH stainless

The ultimate pedal for enduro riding and racing, with a longer spindle. - Concave platform for secure foothold - 6 adjustable pins per side for grip - Integrated traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for increased shoe clearance and control - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearing & double seal system

For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred. Specifications: - spindle material: forged scm 435 chromoly steel - body material: 6061-T6 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - adjustable pins: 6 per side for grip - endcap: hex alloy - cleat: premium brass cleats with shims included - weight: 419g per pair

Full suspension or entirely rigid, upon a mountain top or deep in the woods, it’s up to you to define your trail. The Mallet Trail pedal fills the missing piece in Crankbrother's clip-in range, sitting perfectly between the Candy and Mallet E pedals. Equipped with a long spindle for stability and speed, two adjustable pins per side for added traction, and their eggbeater system with 4-sided entry and superior mud shedding, the Mallet Trail is ready to join you on your next adventure. - Optimized platform size and surface for trail/gravel riding - Long spindle, 57mm q-factor for more shoe clearance and stability at speed - Integrated traction pad technology to customize and optimize the shoe/pedal interface - 2 adjustable pins per side for grip - Hex alloy endcap for durability - 4-sided entry / superior mud shedding - Customizable float & release angle

The V11 pedal is for those who favor durability, compliance, and affordability of composite pedals. Molded with the same proven shape as the multi-award-winning Vault pedal, providing a huge platform with DMR’s unique concave shape that allows your foot to sit deep into the center for supreme grip. - Durable glass-reinforced nylon body features eleven replaceable steel pins each side for rock solid grip - Pins are secured with captive locknuts for ultimate durability - Fully rebuildable with the same proven internals as DMR Vault pedals - Large platform area 105mm x 105mm, and 19mm thick - Low profile body with concave footbed

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6902 Bearing

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss Star Ratchet Kit - 36T

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss Star Ratchet Kit - 54T

Damper rebuild kit for Topaz model rear shocks.

Service kit for Topaz model rear shocks.

- Clamps to a threadless steerer - Offers up to 4-1/2" stem height increase - Forged 6061-aluminum provides extra strength - Machined aluminum top cap is threaded, providing easy installation

Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g

Dimension Steerer Extender adds 2 to 3-1/4" height to steerer. - Extender clamps to steerer; stem clamps to extender - Adds 2 to 3-1/4-inch height to threadless steerer - Includes top cap and long bolt - 40mm of threadless steerer is required for proper installation - Do not stack steerer extenders; no more than one steerer extender recommended per bike - WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers

Tech specs: - BSA: 91g - PF30: 117g - BB86: 66g - BB386: 103g

The Easton EA90 aluminum crankset is optimized for gravel, cyclocross, and road riding styles. It offers the versatility of the CINCH system for a variety of gearing combinations. - EA90 alloy crank arms are lightweight and feature a matte black anodized finish - CINCH direct mount technology is compatible with both 1x and 2x setups - CINCH power meter compatible - Bottom bracket and chainrings sold separately - Number of Chainrings: No Rings, No Spider Included - Chainline/Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay, 135/142 Road Disc Hubs < 415 mm Chainstay - Crank Intended Use: Cyclocross, Gravel, Road - Pedal Spindle: 9/16" - Spindle Interface Type: RaceFace/Easton CINCH - Drivetrain Speeds: 10, 11 - BB Included: No

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

ABI Headset Bearing for new builds or replacements. - Enduro Headset Bearing ACB 4545 137 Stainless 37 x 46.85 x 7 mm: 45 x 45

More support with more comfort Why not combine the best? With the GA3, the winged grip has proven its genius to the All-Mountain world. The special thing about the GP1's off-road cousin is, he locks on tight with a lightweight inner clamp. The concept combines all the relief benefits of the wing and actively supports your wrist. Your freedom of movement and the accompanying bike control remains fully intact. Riding pleasure guaranteed! What exactly are the benefits of the wings on the grips? The longer a ride is, the harder it is for a rider to maintain the ergonomically correct hand position on the bike. As a result, riders often bend their wrists too much, stressing nerves and tendons and inhibiting blood circulation. Numbness and pain in your hands are often the undesirable consequences. The GA3 grip optimizes the hand position through the Miniwings and prevents over-bending in your wrist. What is the carpal tunnel? The carpal tunnel is an anatomic passage in your wrist for nerves and tendons running from the lower arm to the hand. If the wrist is bent too much the nerves become constricted, which often leads to pain and numbness. The GA3 with Miniwing is based on the well-established and proven design of the MTB-specific GA2 grips. The particular shape of the grips provides you with great comfort and grip, without compromising the freedom of movement. This allows you to have all the control you need to tackle the most demanding of trails with full confidence. As an ergonomically perfected expansion of the GA-series by Ergon, the primary purpose GA3 grips is to provide relief out in the trail. But, they're not only perfect for the MTB category, they are also ideal on fitness-oriented and urban bikes. The ergonomic winged-grip GA3 is available in five striking colors. Ergon grips don't just feel great, they look great, too!

The GP1 Evo is the new benchmark for hand comfort and support, is free of harmful substances and exceeds strict EU quality standards with a SGS certification. The Evo version elevates the original multi-award-winning comfort grip to the highest level of ergonomics and comfortable cycling. Design, development and manufacturing are Made in Germany to guarantee the highest quality product with increased sustainability and minimal waste production. - German made rubber compound is of the purest quality - Forged aluminum clamp, while the inner core of the GP1 Evo is made plastic that we have reinforced with fiberglass - Carbon bar compatible - Alleviates hand and wrist pain with ergonomic design - Large grip is best for riders with large hands, non-dynamic riding, commuting, and city riding - Shape: Ergonomic - Lock On: Yes - Length: 131.9

The GP1 Evo is the new benchmark for hand comfort and support, is free of harmful substances and exceeds strict EU quality standards with a SGS certification. The Evo version elevates the original multi-award-winning comfort grip to the highest level of ergonomics and comfortable cycling. Design, development and manufacturing are Made in Germany to guarantee the highest quality product with increased sustainability and minimal waste production. - German made rubber compound is of the purest quality - Forged aluminum clamp, while the inner core of the GP1 Evo is made plastic that we have reinforced with fiberglass - Carbon bar compatible - Alleviates hand and wrist pain with ergonomic design - Small grip is best for riders with small hands, a dynamic riding style, those wearing thick padded gloves, and riders riding or racing mountain bike terrain - Shape: Ergonomic - Lock On: Yes - Length: 131.9

The Ergon grip with a 3-finger bar end provides a wide range of use, ranging from mountain bikes to fitness to touring bikes. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP3 eliminates numb hands, aching fingers, and tired forearms. The GP3 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Carbon bar compatible - Clamp: fiberglass composite with rubber inserts - Uses: touring, commuting